Led Indications - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
4.1.5

LED Indications

Refer to Table 6-2 CPUII( )-U10 LED
LED
LED1 On indicates that Compact Flash is installed
Indicates system alarms – Refer to
LED2
Status
Indicates system alarms – Refer to
LED3
Status
Indicates system alarms – Refer to
LED4
Status
LED5
On indicates the PKG is operating.
(LIVE)
The LEDs are on the back of the ETU in the following order top

to bottom:
LED5 (LIVE)
LED4
LED3
LED2
LED1
LED Indication
LED5 LED4 LED3
On Off Off
Off Off Off
Off On Off
Off Off On
Off On On
On Blinking Blinking
On Blinking Off
Table 6-2 CPUII( )-U10 LED Indications
Description
Table 6-3 CPUII( )-U10 Status
LED2 LED1
Off On
Off On
Access
On
blink
On On
Access
On
blink
Blinking On
Off On
Document Revision 3
Indications.
Table 6-3 CPUII( )-U10
Table 6-3 CPUII( )-U10
Table 6-3 CPUII( )-U10
Status
System starting up
System initializing
Initializing disk or
formatting
Boot program initializing in
flash memory
Reading system software
Upgrading system
software
Upgrading boot software
6 - 11