NEC Electra Elite IPK II System Hardware Manual page 540

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
11 - 36
Figure 11-46 Removing the Tabs from the Adapter
3. Remove the tabs from the WMU-U Unit as shown in
Figure 11-47 Removing the Tabs from the WMU-U
Tabs that are removed depend on the Multiline Terminal type.)
Cut
Cut
DTU/DTP-8-1 TEL
DTP-8D-1/DTU-8D-2 TEL
DTU/DTP-16-1 TEL
DTP-16D-1/DTU-16D-2TEL
DCU-60-1 CONSOLE
Figure 11-47 Removing the Tabs from the WMU-U Unit
4. Bundle the cord from the modular jack leaving about eight
inches. Use a tie wrap to secure the bundled cord.
Installing Electra Elite Optional Terminal Equipment
Electra Elite IPK II
Cut
DTU/DTP-32-1 TEL
DTP-32D-1/DTU-32D-2 TEL
Unit. (The
Cut
Cut