NEC Electra Elite IPK II System Hardware Manual page 383

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
4. Turn the base cover upside down, feed the line cord through
the cutout and attach the cover to the wall using six screws as
shown in Figure 8-39 Wall Mounting the Base
Figure 8-39 Wall Mounting the Base Plate
5. Install the Multiline Terminal over the four tabs on the base
cover, and push down until it clicks in place.
Figure 8-40 Installing the
Document Revision 3
Plate.
Multiline Terminal
8 - 31