Programming Options - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
Key
CLEAR (vertical line
and left arrow icon)
VOLUME (loud and
dim speaker icons)
MUTE (mic with
diagonal line icon)
10.1.4

Programming Options

To enter Programming mode, press and hold REDIAL until a
diamond arrow is displayed on the LCD. Then press the applicable
key and follow the instruction in
Menu Option
Ringer Melody
Dialing Mode
Flash Duration
Local Number
Conference
Service
Table 13-2 Keypad Functions
Press to clear the last digit entered or press and hold
to clear all numbers.
Press to exit programming mode.
Press during call to adjust call volume or press while
telephone is ringing or in standby mode to adjust
ringer volume.
Press to mute sound.
Table 13-3 Programming
Table 13-3 Programming Options
Key
Press REDIAL. The current melody selection
1 flashes. Press 1~5 to change melody. Press
REDIAL to save the selection.
Press REDIAL. The current dialing selection
flashes. Press 1 for tone or 2 for pulse. Press
2
REDIAL to save the selection.
Press REDIAL. The current duration flashes.
Press 1~5 to select duration as follows:
1 = 600 ms
2 = 300 ms
3
3 = 150 ms
4 = 100 ms
5 = 80 ms
Press REDIAL to save the selection.
Press REDIAL. Enter the telephone number
that you want displayed on the LCD in
4
standby mode. Press REDIAL to save the
number.
Press REDIAL. Enter the telephone number
5 you want the conference key to dial. Press
REDIAL to save the number.
Press REDIAL. Enter the telephone number
6 you want the O key to dial. Press REDIAL to
save the number.
Document Revision 3
Function
Options.
Programming
13 - 37