Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
3.
Close the base plate, and snap the cover in place.
Figure 11-16 Attaching the Unit to the Multiline Terminal
4.
Install a ferrite core (provided with the APA-U Unit) by looping
line cord through the core between the terminal (one inch from
the terminal) and ESI(8)-U10 ETU. This core is only used with
the APA-U Unit.
5.
Plug the telephone cord in the jack.
3.3.2
Switch Settings
The APA-U Unit has one switch.
Figure 11-17 APA-U Unit Switches
Document Revision 3
11 - 15