Selecting An Installation Location; Connecting The Telephone Cords - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
6.2
6.3
___________________________________________________________________________________
System Hardware Manual

Selecting an Installation Location

Select a location to avoid excessive heat or humidity. The base unit should be
placed on a desk or tabletop near a standard 120 Vac outlet and within reach
of the telephone line connection on the Electra Elite IPK Multiline Terminal.
Keep the base unit and the handset away from sources of electrical noise ( e.g.
fluorescent lighting).

Connecting the Telephone Cords

term
The D Cordless II terminal is connected to the telephone line and to the
host telephone using two telephone line jacks on the back of the Base Unit:
LINE IN and LINE OUT.
Observe the following warnings during installation:
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line is disconnected at the network interface.
Use caution when installing or modifying telephone lines.
term
Figure 13-7 D Cordless II
Document Revision 3
13 - 11