Vms(2)/(4)/(8)-U( ) Etu Connectors; Vms-U30 Etu Jumper Settings; Vms-U30 Etu Connectors - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
6 - 142
7.6.5

VMS(2)/(4)/(8)-U( ) ETU Connectors

The following connectors are included:
CN1
Connects to the backplane.
9-pin RS-232 (COM2)
Not used (MDM-F-20 Unit)
RJ-11 modem port (COM2)
Remote connector on serial interface (MDM-F-20 Unit)
9-pin RS-23 (COM1)
Local Serial connector on main ETU for direct connection
7.6.6

VMS-U30 ETU Jumper Settings

J7
Pin 1 to Pin 2
Pin 2 to Pin 3
7.6.7

VMS-U30 ETU Connectors

The following connectors are included:
J2
J6
J9
J11
J12
Used only on VMS
Compact flash is master drive.
Hard Drive is master drive (default).
Connects to the backplane.
Used for Compact flash drive on FMS.
RJ-45 LAN connector for network connection
COM port for console programming connection
Port expansion connector for DSP-U30
Electra Elite IPK II
Installing ETUs (Circuit Cards)