NEC Electra Elite IPK II System Hardware Manual page 592

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
13 - 24
Figure 13-20 Placing the Telephone Cords in the Wall Mount Stand
5. Place the base unit on the posts of the wall screws and push down until
it is firmly seated.
Figure 13-21 Attaching the Wall Mount Unit to the Wall
6. Plug the other end of the short telephone cord in a telephone wall jack.
7. Plug the AC adapter in a standard 120 Vac wall outlet. Refer to
13-18 Plugging the AC Adapter into the AC Wall Outlet on page
Do not use an outlet controlled by a wall switch.
Installing Cordless and Wireless Telephones
Electra Elite IPK II
Figure
13-22.