Ctu(S) Unit Connections - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
11 - 24
Headset Operation
When user uses CTU and TAPI and sets data for Telephony Service
Provider (TSP), the headset button can be controlled by TSP.
USB Interface
This adapter uses Full Speed (12Mbps) as defined in the USB
Specification.
3.6.1

CTU(S) Unit Connections

This unit is a Computer Telephony Application adapter to connect a
Universal Serial Bus to an ESI(8)-U( ) ETU and can be connected to
any DTU/DTP Multiline Terminal except DTP-2DT-1, DTP-16HC-1 or
Cordless terminals.
A required AC Adapter is provided with the unit.
The following connections are required:
AC Adapter
Multiline Terminal jack labeled LINE
PC USB port
ESI port to ESI(8)-U( ) ETU
To
DTU or DTP
Multiline Terminal
Figure 11-29 CTU (S)-U Unit
Installing Electra Elite Optional Terminal Equipment
Electra Elite IPK II
DC 24V (ADP)
USB Cable to PC
To ESI Port