Programming Options - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
3.11.4

Programming Options

To enter Programming mode, press and hold REDIAL until a
diamond arrow is displayed on the LCD. Then press the applicable
key and follow the instruction in
Menu Option
Ringer Melody
Dialing Mode
Flash Duration
Local Number
Conference
Service
Country
Press CLEAR to return the previous menu. Press and hold to

exit programming without saving changes.
Press and hold 1 to enter hyphen or
Press CLEAR before entering a new number.
Table 9-14 Programming
Table 9-14 Programming Options
Key Programming
Press REDIAL. The current melody selection
1 flashes. Press 1~5 to change melody. Press
REDIAL to save the selection.
Press REDIAL. The current dialing selection
2 flashes. Press 1 for tone or 2 for pulse. Press
REDIAL to save the selection.
Press REDIAL. The current duration flashes.
Press 1~5 to select duration as follows:
1 = 600 ms
2 = 300 ms
3
3 = 150 ms
4 = 100 ms
5 = 80 ms
Press REDIAL to save the selection.
Press REDIAL. Enter the telephone number that
4 you want displayed on the LCD in standby mode.
Press REDIAL to save the number.
Press REDIAL. Enter the telephone number you
5 want the conference key to dial. Press REDIAL to
save the number.
Press REDIAL. Enter the telephone number you
6 want the O key to dial. Press REDIAL to save the
number.
Press REDIAL. Press number key for country as
follows:
1 US/Canada/China/Japan/Mexico/Singapore
2 Europe CTR 21
3 Australia
7
4 S. Africa
5 Brazil
6 New Zealand
7 South Korea
Press REDIAL to save the country setting.
to enter a space in the number.
Document Revision 3
Options.
9 - 67