NEC Electra Elite IPK II System Hardware Manual page 145

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
When you insert or remove an ETU, be sure the wrist strap is connected
to the Frame Ground Terminal on the KSU.
Figure 6-2 Inserting or Removing ETUs from the KSU
When you hold an ETU, do not touch the components or the soldered
surfaces with bare hands. Place one hand under the bottom corner of
the ETU and with the other hand hold the ejector tab (located in the top
corner of the ETU).
Figure 6-3 Handling an ETU
Document Revision 3
Frame
Ground
Terminal
Ejector
Tab
6 - 3