Led Indications - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
6 - 140
7.6.4

LED Indications

Refer to Table 6-49 VMS(2)/(4)/(8)-U( ) ETU LED
Table 6-49 VMS(2)/(4)/(8)-U( ) ETU LED Indications
LED Description
LIVE ETU status
CH1 Port status
CH2 Port status
CH3 Port status
CH4 Port status
CH5 Port status
CH6 Port status
CH7 Port status
CH8 Port status
MB MB Switch
status
BIOS BIOS Error
Status
BCLR Application
status
When BCLR LED is orange, check error type on console

screen. After error is corrected, LED automatically changes to
green. Do Not connect link between console and ETU until
BCLR turns green during booting.
HDD
Do not reset the ETU while the HDD LED is flashing.

On
Receiving
power
Busy
Busy
Busy
Busy
Busy
Busy
Busy
Busy
ON
BIOS Error
Red:
DOS started
(VM not
ready)
Green:
VM running
Orange:
Error
Hard Disk Not Used
status
Electra Elite IPK II
Indications.
Flashing Off
Not Used No Power
Not Used Idle/Not used
Not Used Idle/Not used
Not Used Idle/Not used
Not Used Idle/Not used
Not Used Idle/Not used
Not Used Idle/Not used
Not Used Idle/Not used
Not Used Idle/Not used
Not Used OFF
Not Used No error
Not Used Idle
Hard Disk Hard Disk
active inactive
Installing ETUs (Circuit Cards)