Mounting The Wall Mount Unit On A Switch Box - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
15.2
___________________________________________________________________________________
8 - 46

Mounting the Wall Mount Unit on a Switch Box

1. Locate the screw holes on the wall mount unit and hang the cover over
the screws on the switch box as illustrated in
Mount Unit on the Switch
This method is not recommended because of varied strength of switch
boxes.
Figure 8-66 Mounting Wall Mount Unit on the Switch Box
2. Hang the Multiline Terminal on the base cover.
Figure 8-67 Wall Mounted
Figure 8-66 Mounting Wall
Box.
Multiline Terminal
Installing Electra Elite IPK Multiline Terminals
Electra Elite IPK II