Electra Elite IPK II
___________________________________________________________________________________
8.8
___________________________________________________________________________________
System Hardware Manual
Charging Unit Wall Mounting
The charging unit can be wall mounted. Before installing, consider the
following:
Select a location away from electrical cables, pipes, or items behind the
mounting location that could cause a hazard when inserting screws.
Make sure the wall material can support the weight of the charging unit.
Use #10 screws with anchoring devices suitable for the wall material.
To mount the charging unit:
1.
Insert two mounting screws one inch apart. Allow about 3/16 of an inch
between the wall and screw heads for mounting the telephone.
Figure 13-22 Inserting Screws for Wall Mounting
2.
Plug the AC adapter in the charging unit. Wrap the AC adapter cord
around the strain relief.
Figure 13-23 Wrapping AC Adapter Cord Around the Strain Relief Clip
TOP
3/16 in.
1 3/16 in.
Strain
Relief
Document Revision 3
13 - 25