Ip-R Unit; Ip-R Unit Specifications - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
3.7
___________________________________________________________________________________
System Hardware Manual

IP-R Unit

The Elite IP-R Unit allows connection to an IAD(8)-U( ) ETU with a MEGACO
Station Package in the Electra Elite IPK II.
Installing the IP-R Unit in the plug-in socket located at the bottom of the
Terminal transforms a DTH Multiline Terminal into an IP station. The user can
also connect a PC to the LAN through an RJ-45 Ethernet jack on the IP-R Unit
that acts as a switching hub.
Any Terminal (8D/16D/32D-1) with an IP-R Unit installed, in conjunction with
the IAD(8)-U() ETU (MEGACO Station Package), enables IP Telephony
stations for the Electra Elite IPK II System. The IP stations can provide
connectivity with the Corporate Elite over the local LAN (Ethernet).
3.7.1

IP-R Unit Specifications

Refer to Table 9-4 IP-R Unit
Feature
Interface
Protocol
Jitter Buffer
Quality of Station (QOS)
Local Power
Applications
Standards
Voice Specifications
term
Mountable D
Specifications.
Table 9-4 IP-R Unit Specifications
10/100 Base-T (IEEE 802.3), RJ-45
Voice (UDP, RTP, and RTCP)
Signal (TCP, H.225 and H.245)
Max 90 ms
Network Managed switches supporting Type
of Service (TOS) field and VLAN support
27 V 750 mA via AC Adapter Base
TFTP (Client), DHCP Client, Megaco (H.248)
UL1459, FCC Part 68
G.711 (PCM Mu-law/A-law) G.729
term
D 8D, 16D, 32D-type telephone
Document Revision 3
Specification
9 - 29