Wall Mounting The Expansion Ksu - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
3.5
___________________________________________________________________________________
System Hardware Manual

Wall Mounting the Expansion KSU

1. Fit the bottom of the Expansion Wall Mount Bracket to the top of the
Basic Wall Mount Bracket. Refer to
Wall Mount Bracket to the Basic Wall Mount
Figure 5-11 Attaching the Expansion Wall Mount Bracket
2. Hang the KSU on the two hooks protruding from the expansion wall
mount bracket as shown in
Bracket.
3. To secure the KSU to the wall, install a locally provided screw in the hole
in the center of the wall mount bracket as shown in
the Basic KSU to the Wall on page
Figure 5-11 Attaching the Expansion
to the Basic Wall Mount Bracket
Figure 5-9 Hanging the Basic KSU on the
5-14.
Document Revision 3
Bracket.
Figure 5-10 Securing
5 - 15