Applying Power To The Ip-R Unit - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
9 - 30
3.7.2

Applying Power to the IP-R Unit

Power is provided to the IP-R Unit using an AC-2R/AC-3R Unit or
Power Over the Ethernet.
Figure 9-30 IP Terminal Rear Connector Locations
AC-2R/AC-3R Unit (AC Adapter)
Plug the optional AC-2R/AC-3R Unit input jack in the AC
Adapter connection shown in
Connector
Power over the Ethernet (POE)
POE sometimes called In-Line Power, is a LAN technology that
allows standard 10/100 Base-T data cables to pass current
from a power source to a requesting-end device. Refer to
Figure 9-31 IP-R Unit SW1 Setting for Power
Installing Electra Elite IPK II Optional Terminal Equipment
Figure 9-30 IP Terminal Rear
Locations.
Figure 9-31 IP-R Unit SW1 Setting for Power Source
Electra Elite IPK II
Source.