NEC Electra Elite IPK II System Hardware Manual page 319

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
8.10.4 Applications Removal Procedure
Table 6-68 PVA(X)-U( ) ETU Configurations
Configuration
MG16
IP CCISoIP
MG_CCIS
CNF
The PVA(X)-U( ) ETU is hot swappable and can be removed from
the KTS without powering down the ETU or the Electra Elite IPK II
system.
When the Electra Elite IPK II KSU requires system reset, this ETU
comes back on line.
8.10.5 Configuring
When installed for the first time the PVA(X)-U( ) ETU comes up with
factory default settings shown in
Settings for TCP/IP
Table 6-69 Default Network Settings for TCP/IP Addressing
IP Address
Subnet Mask
Default Gateway
These parameters must be redefined before the ETU can work in
your environment. Refer to the Applicable IP Application Features
and Specifications and installation instructions.
Electra Elite
Ports IPK II
Installation slot
4~16
(Increments S1~S8
of four)
4~24
(Increments S1~S8
of four)
4~24
(Increments S1~S8
of four)
8/16 S1~S8
Table 6-69 Default Network
Addressing.
Document Revision 3
Application
MG16 Package
CCISoIP Package
Combo ETU MG16
and IP CCISoIP
Multimedia
Conference Bridge
192.168.1.100
255.255.255.0
0.0.0.0
6 - 177