Operation Using The D; System Reset - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
4.6
4.7
___________________________________________________________________________________
13 - 8
Using the Mute Feature
1. Push in the Listening Volume/Mute Control to mute the headset.
A light beep indicates mute is being used.
2. Push the control again to turn off the mute feature.

Operation Using the D

Switch from Headset to Handset
When you are using the headset during a call and want to switch to the
handset:
1. Remove the handset from the Base.
2. Press the headset Talk Button, and the handset can be used.
Switch from Handset to Headset
When you are using the handset during a call and want to switch to the
headset:
1. Press the headset Talk Button, and the headset can be used.
2. Place the telephone handset on the Multiline Terminal.
3. When finished, press the Headset Talk Button to end the call.

System Reset

To recover from some faults, system reset may be necessary. To perform
system reset:
1. Press both the Talk Button and Mute Control Button on the headset for
five seconds.
2. When the Talk Indicator blinks release both buttons.
3. Press the Talk Button again.
4. Disconnect the AC Power Adapter from the jack for five seconds and
then plug it back in.
term ®
Headset Cordless II
Installing Cordless and Wireless Telephones
Electra Elite IPK II