Led Indications - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
6 - 94
7.1.4

LED Indications

Refer to Table 6-31 CMS(2)/(4)-U( ) ETU LED Indicators.
Table 6-31 CMS(2)/(4)-U( ) ETU LED Indicators
LED Description
LIVE ETU status
CH1 Port Status
CH2 Port Status
CH3 Port Status
CH4 Port Status
MB MB Switch Status
BIOS DOS Status
BCLR Application Status
If BCLR LED is orange, check error type on console screen.

After error is corrected, LED automatically changes to green.
Do Not connect link between console and ETU until BCLR turns
green during booting.
HD Flash Status
Do not reset the ETU while the HD LED is flashing.

On Flashing
Receiving Not Used
Power
Busy Not Used
Busy Not Used
Busy Not Used
Busy Not Used
ON Not Used
BIOS Error Not Used
Red: DOS Not Used
started
(VM Not
Ready)
Green: VM
Running
Orange: Error
Not Used Compact
Flash Disk
Active
Installing ETUs (Circuit Cards)
Electra Elite IPK II
Off
No Power
Idle/Not
Used
Idle/Not
Used
Idle/Not
Used
Idle/Not
Used
OFF
No error
Idle
Flash
Inactive