Wall Mounting The Telephone - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
8 - 30
13.1.2

Wall Mounting the Telephone

1. Extend and remove the base cover from the telephone. Refer
to Section 12 Removing or Installing the Base Plate on a
Multiline
2. Remove cutout shown in
3. Plug line cord in the wall receptacle. Leave about eight inches
of cord and bundle the rest as shown in
the Line
Terminal.
Figure 8-37 Removing the
Figure 8-37 Removing the Cutout
Cord.
Figure 8-38 Bundling the Line Cord
Installing Electra Elite IPK Multiline Terminals
Electra Elite IPK II
Cutout.
Figure 8-38 Bundling