Document Revision 3
___________________________________________________________________________________
5.2
___________________________________________________________________________________
6 - 24
BRT(4)-U20 ETU
5.2.1
Description
The Basic Rate Trunk (BRT) Interface ETU terminates ISDN Basic
Rate Trunk lines and supports four ISDN-BRI circuits. Each trunk
supports two B channels. These eight B channels can be used for
CO trunks with DTMF signaling.
This ETU uses an S/T-type interface. When connecting to a CO, a
locally provided Network Termination unit (NT1) is required. Caller
ID is supported.
One BRT ETU provides a maximum of four ISDN circuits that
provide eight B channels to be used as trunks.
Figure 6-12 BRT(4)-U20 ETU
Installing ETUs (Circuit Cards)
Electra Elite IPK II