Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
100mm
Figure 7-10 Installing the Screws
2.
The back of the PGD(2)-U10 ADP has two key-hole type openings.
Place the PGD(2)-U10 ADP over the two screws and slide it down or
over (depending on the positioning) to lock it in place.
Figure 7-11 Wall Mounting the PGD(2)-U10 ADP
4mm
3mm
100mm
Protruding
Screws
Document Revision 3
Protruding
Screws
7 - 11