Installation; Switch Settings; Led Indications - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
6 - 64
6.2.2

Installation

Basic Port Package
A maximum of seven ESIB(8)-U( ) ETUs can be installed in slots
S1~S8.
The maximum number of ESIB(8)-U( ) ETUs that can be installed
depends on other station cards installed. The system is limited by 64
trunk and station ports combined. This ETU shares the total number
of Station ports in the system.
Calculating maximum capacity is based on the system having a
minimum of eight Electronic Station Interface (ESI) ports, four trunk
ports and a PKUII-U Unit installed.
Expanded Port Package
A maximum of 23 ESIB(8)-U( ) ETUs can be installed in slots
S1~S8.
The maximum number of ESIB(8)-U( ) ETUs that can be installed
depends on other station cards installed. The system is limited by
256 stations. This ETU shares the total number of Station ports in the
system.
Calculating maximum capacity is based on the system having a
minimum of eight Electronic Station Interface (ESI) ports, four trunk
ports and a PKUII-U Unit installed.
Refer to Chapter 3 System
Power-Based Calculator Chart
6.2.3

Switch Settings

SW1 resets the ETU.
6.2.4

LED Indications

Live LED indications are listed below.
Blinking Red Normal Operation
Steady Red
Off
LED1 indications are listed below.
Steady Red
Off
Specifications,
for Universal Slots.
Operation Stopped (power On)
No Power
Some port(s) busy
All ports idle
Installing ETUs (Circuit Cards)
Electra Elite IPK II
Section 4 KSU