NEC Electra Elite IPK II System Hardware Manual page 346

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
7 - 20
Table 7-1 PMS-U10 Connectors
Connector
COM 1 Used for serial connection to PMS System.
COM 2 Used for serial connection to voice mail.
Used for IP connection to KTS PMS
ETH 0
Configurator software and PMS System.
ETH 1 Not Used.
This pin hole on front of the PMS-U10 has no
label. To default, press and hold with paper
Default
clip, power on unit, wait three seconds and
release.
USB Not Used.
8-pin Connector Not Used.
Table 7-2 PMS-U10 LED Indications
LED
Power Green when power is On.
Green when connected.
ETH 0
Flashing during data transmission
ETH 1 Not Used.
Installing Electra Elite IPK II KSU Common Optional Equipment
Electra Elite IPK II
Description
Indication