Led Indications; Connectors - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
Table 6-11 COIB(4)-U20 ETU Default Switch/Jumper Settings
Switch/
Jumper
S1
Reset
5.5.4

LED Indications

Refer to
Table 6-12 COIB(4)-U20 ETU LED
LED
LIVE
LED 1
LED 2
LED 3
LED 4
FAX
5.5.5

Connectors

The following connectors are included:
CN1
CN2
CN3
Setting
Open for COI
Shorted (default) for COID
Toggle
Table 6-12 COIB(4)-U20 ETU LED Indications
Description
Operation
ETU status Stopped
(Power On)
Channel 1 status Busy
Channel 2 status Busy
Channel 3 status Busy
Channel 4 status Busy
FAX status Busy
Connects to the backplane.
Future
Future
Document Revision 3
Description
Selects COIB(4)-U20
ETU COI or COID
mode.
Resets the
COIB(4)-U20 ETU
Indications.
On Flashing
Normal
Operation
Not Used
Not Used
Not Used
Not Used
Not Used
Off
No
Power
Idle
Idle
Idle
Idle
Idle
6 - 37