Connecting The Base Unit - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
3.3
___________________________________________________________________________________
System Hardware Manual

Connecting the Base Unit

1. Connect the AC adapter to the DC IN 9 V jack and to a standard 120V
AC wall outlet.
Route the cord
To AC Outlet
AC Adapter
(supplied)
Figure 13-2 Connecting the D
2. Set the base on a desk or tabletop, and place the handset in the base
unit as shown.
Figure 13-3 Raising the Antenna on the D
To DC IN 9V
term
Headset
Cordless Base Unit to the Adapter
term
Headset Cordless Base Unit
Document Revision 3
13 - 3