Cable Routing; Connecting The Battery Expansion Cables On The Ksu - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
3.9
___________________________________________________________________________________
5 - 20

Cable Routing

3.9.1

Connecting the Battery Expansion Cables on the KSU

1. Use the DC Expansion Cable (included with the EXP-U ETU) to
connect the BATTERY EXT on the Basic KSU to the
BATTERY EXT of the Expansion KSU.
2. To connect an Expansion KSU, use the two screws to attach
the FG plate to the Basic and Expansion KSUs. Refer to
5-19 Attaching the Frame Ground
second Expansion KSU, another FG plate is required.)
Figure 5-18 Connecting DC Expansion Cables
Electra Elite IPK II
Plate. (When installing a
Installing KSUs
Figure