NEC Electra Elite IPK II System Hardware Manual page 506

Document Revision 3
___________________________________________________________________________________
3.
4.
___________________________________________________________________________________
11 - 2
Insert a flat head screwdriver into A in
straight down until tab unlocks.
Lightly press the right side of leg shown as B in
Tab, insert a flat head screwdriver at C. Press straight down until other tab
unlocks.
Figure 11-1 Raising the Base Plate
Figure 11-2 Unlocking Tab
Figure 11-2 Unlocking Tab
Installing Electra Elite Optional Terminal Equipment
Electra Elite IPK II
and press
Figure 11-3 Releasing Right