Electra Elite IPK II
___________________________________________________________________________________
2.6
S
3
I
ECTION
NSTALLING
The compact design of the Electra Elite IPK II KSU provides easy installation. The
KSUs can be floor mounted or rack mounted. Only the Basic KSU can be floor
mounted. The floor mounting option is for demonstration purposes only. The
information in this section provides detailed instructions for installing the KSU.
___________________________________________________________________________________
System Hardware Manual
Fax CO Branch Connection
This connection is made via the fourth port on any four port analog ETU (COI,
COIB, or COID). Refer to
facsimile machine is connected to the eighth port for the specified slot where
the Analog CO ETU is installed.
B
E
ASIC AND
Before installing the system; observe the following precautions.
Before beginning installation, ensure that the Power Supply Unit (PSU) is OFF
and that the power cord is disconnected from the AC outlet.
Do not touch the soldered surfaces of the ETUs.
Figure 5-3 Fax CO Branch
Demark
T1
T
R1
R
T2
T
R2
R
T3
T
R3
R
T4
T
R4
R
T8
R8
RJ-11
Figure 5-3 Fax CO Branch Connection
KSU
XPANSION
S
Document Revision 3
Connection. The
CO
FAX
5 - 9