Applying Power To The Base Unit - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
6.4
___________________________________________________________________________________
13 - 12
term
To connect the D Cordless Terminal to the host telephone:
1. Unplug the telephone line cord from the host telephone, and connect it to
the LINE IN jack.
2. Using the telephone line cord supplied with the
connect the LINE OUT jack to the host telephone jack.

Applying Power to the Base Unit

1. Plug the AC Adapter cord into the AC Adapter input jack on the Base
Unit.
Use only the AC Adapter supplied with the
Terminal.
2. Plug the AC Adapter into a standard 120 Vac wall outlet.
3. Route the power cord where it does not create a trip hazard or where it
could become chafed and create a fire or other electrical hazards.
The AC Adapter furnished with this telephone can be equipped with a
polarized line plug (a plug having one blade wider than the other). This
plug fits into the power outlet only one way. When you cannot insert the
plug fully into the outlet, reverse the plug. When the plug still does not fit,
contact your facilities coordinator about replacing the obsolete plug. Do
not alter the shape of the blades of the polarized plug.
Line OUT to Host
Figure 13-8 Connecting the Base Unit
Installing Cordless and Wireless Telephones
Electra Elite IPK II
term
D
Cordless Terminal,
term
D
Handset Cordless
Line IN from
Telephone Jack