General Information; Preparing Multiline Terminal For Adapter Installation - NEC Electra Elite IPK II System Hardware Manual

Installing Electra Elite
Optional Terminal Equipment
___________________________________________________________________________________
S 1 G
ECTION
The Electra Elite optional equipment can be purchased separately from the system
and added as the customer business grows. Except as noted, these adapters can be
installed on Electra Elite Multiline Terminals. The adapters can also be used with
term
D
A Multiline Terminal can have up to three adapters installed at the same time. When
attaching an APR-U, CTA-U, CTU(S)-U, or HFU-U Unit an external power supply is
required. Only one power supply is needed even when more than one adapter is
installed.
When an adapter is installed in a terminal for the first time, the base cover on the
Multiline Terminal may have to be modified. The base cover has two access panels
that are removed before the cover can be closed over the adapters to complete the
installation.
S 2 P
ECTION REPARING
To prepare the Multiline Terminal for adapter installation:
1.
2.
___________________________________________________________________________________
System Hardware Manual
I
ENERAL NFORMATION
Series E (DTP) Multiline Terminals.
M
ULTILINE
Unplug the telephone cord from the terminal.
Turn the terminal upside down. Push the tabs indicated in
the Base Plate, and raise the inner area of the base plate.
T A
ERMINAL FOR DAPTER
Chapter 11
I
NSTALLATION
Figure 11-1 Raising
11 - 1