Removing The Base Cover - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
14.5
___________________________________________________________________________________
8 - 38
3. Refer to Figure 8-51 Connecting Terminal to the
plastic panel over the Line Card, and push down the corners until they
click into place.

Removing the Base Cover

The height of the Multiline Terminal can be lowered by removing the Base
Cover.
1. Turn the Multiline Terminal upside down, refer to
Knob to Release Base
Cover.
Figure 8-52 Pressing Knob to Release Base Cover
Figure 8-51 Connecting Terminal to the System
Cover, and press on the knob to release the Base
Installing Electra Elite IPK Multiline Terminals
Electra Elite IPK II
System, place the
Figure 8-52 Pressing