NEC Electra Elite IPK II System Hardware Manual page 118

Document Revision 3
___________________________________________________________________________________
___________________________________________________________________________________
5 - 30
2. Connect the external batteries to the KSU in the
location shown in
External Battery to the Basic
external battery cable to the EXT connector on the
PSU of the Basic KSU. Bundle any extra cabling
together.
Figure 5-31 Connecting the External
3. Route the cables through the clamps on the KSU as
shown in Figure 5-32 Threading Cables through
Clamps on the Basic
Electra Elite IPK II
Figure 5-31 Connecting the
KSU. Connect the
Battery to the Basic KSU
KSU.
Installing KSUs