Wall Mounting Ith-4D-3 Multiline Terminals; Using A Switch Box - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
14.6
___________________________________________________________________________________
8 - 40
4. Refer to Figure 8-55 Installing Base
cover and move it toward the knob until it clicks in place.

Wall Mounting ITH-4D-3 Multiline Terminals

The ITH-4D-3 terminal can be installed on the wall either by using a switch box
or by direct connection.
14.6.1

Using a Switch Box

1. Remove the Base Cover, and hook it on a switch box as shown
in Figure 8-56 Attaching Base Cover to Switch
Cover, Press down on the base
Figure 8-55 Installing Base Cover
Figure 8-56 Attaching Base Cover to Switch Box
Installing Electra Elite IPK Multiline Terminals
Electra Elite IPK II
Box.