Removing The Multiline Terminal From The Base Plate; Removing The Multiline Terminal From The Wmu-U Unit - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
___________________________________________________________________________________
System Hardware Manual
3.9.4

Removing the Multiline Terminal from the Base Plate

To remove the Multiline Terminal from the base cover, lift the
Multiline Terminal to disengage top tabs, turn it slightly counter
clockwise to unlock lower tabs on base cover, and remove it.
Figure 11-51 Removing the Multiline Terminal from the Base Plate
3.9.5

Removing the Multiline Terminal from the WMU-U Unit

To remove the Multiline Terminal from the WMU-U Unit, lift the
Multiline Terminal to disengage top tabs and lower the terminal from
the WMU-U Unit.
Document Revision 3
11 - 39