Main memory
10.3
Removing memory modules
Upgrade and Repair Unit
(URU)
Tools: tool-less
10.3.1 Preliminary steps
"Disabling or suspending BitLocker functionality" on page 79
Ê
"Disabling SVOM boot watchdog functionality" on page 80
Ê
"Locating the defective server" on page 47
Ê
"Shutting down the server" on page 50
Ê
"Disconnecting the server from the mains" on page 50
Ê
"Getting access to the component" on page 51
Ê
10.3.2 Removing a memory module
Ê Identify the desired memory slot see section
page
245.
V
CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Basic information" on page
Figure 170: Removing memory modules (A)
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory slot.
250
244.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Memory sequence" on
TX150 S8 / TX200 S7