Connecting The Fbu Cable To The Fbu; Installing The Fbu With The Holder - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.3.4

Connecting the FBU cable to the FBU

I
The FBU cable is available in different length. You need the short cable
if the used RAID controller is installed in slot 4.
Figure 118: Connecting the FBU cable
Ê Connect the FBU cable to the FBU.
9.5.3.5

Installing the FBU with the holder

Figure 119: Position of the shoulder screw caps
180 Upgrade and Maintenance Manual
RX200 S8