Connecting The Fbu Cable To The Fbu; Installing The Fbu Holder Onto The Air Duct - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

9.6.5.4

Connecting the FBU cable to the FBU

Figure 114: Connecting the FBU adapter cable to the FBU
Ê Connect the cable end on the FBU module to the FBU adapter cable as
shown.
9.6.5.5

Installing the FBU holder onto the air duct

I
The Installation of a FBU onto the air duct is similar to the installation of
an BBU see section
page 211.
RX300 S8
"Installing the BBU holder onto the air duct" on
Upgrade and Maintenance Manual
Expansion cards and backup units
225