Expansion cards and backup units
9.9
Expansion cards in riser modules
9.9.1
Installing an expansion card in a riser module
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver
– Phillips PH1 / (+) No. 1 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If a riser module is installed: Remove the corresponding riser module, see
"Removing a riser module" on page
▶ If no riser module is installed: Remove the corresponding rear air grid, see
"Removing a rear air grid" on page
310
50.
72.
85.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
89.
50.
55.
49.
RX2540 M7