6.3.2
Installing 3.5-inch HDD modules
I
The 3.5-inch HDD modules are non-hot-plug SAS/SATA HDDs. For more
information, see the "FUJITSU Server PRIMERGY TX1320 M4 Upgrade
and Maintenance Manual".
6.4
Installing a second PSU
6.4.1
Removing the dummy cover
Figure 26: Removing the dummy cover
Ê Press in on both release latches (1) and remove the PSU dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If a PSU is removed and not
immediately replaced by a new one, a dummy cover must be installed in
the bay again to comply with applicable EMC regulations and satisfy
cooling requirements.
TX1320 M4
Operating Manual
Operation
81