Updating Expansion Card Firmware - Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

Basic software procedures
5.3.3

Updating expansion card firmware

For Japan:
Follow the instructions provided separately.
After replacing the expansion card, it is essential to upgrade the firmware to
the latest version without connecting any storage devices. The latest
expansion card firmware version is available from the Fujitsu support web
pages at:
https://ts.fujitsu.com/support/
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
Note on the boot watchdog
Before updating expansion card firmware, ensure that the boot
watchdog is disabled, see
After updating expansion card firmware, enable the boot watchdog
again, see
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from firmware updates.
Using the ServerView Update Manager
For more information on how to update the expansion card firmware using the
ServerView Update Manager or Update Manager Express (UME), see the
following manuals:
– ServerView Update Manager: "ServerView Update Management" user guide
– ServerView Update Manager Express: "Local System Update for
PRIMERGY Servers" user guide
Using the flash tool
The latest firmware files are available as ASPs (Autonomous Support
Packages) for Windows or as Linux tools from the Fujitsu support web pages
at:
https://ts.fujitsu.com/support/
72
"Disabling the boot watchdog" on page
"Enabling the boot watchdog" on page
Upgrade and Maintenance Manual
66.
80.
RX1330 M4