Port 11 - NEC V850/SA1 mPD703015 Preliminary User's Manual

(b) Pull-up resistance option register 10 (PU10)
Read and write in 8-bit units and bitwise are enabled.
Figure 14-26. Format of Pull-up Resistance Option Register 10 (PU10)
00H
After reset:
7
PU10 PU107
PU10n
0
1
(c) Port 10 function register (PF10)
Read and write in 8-bit units and bitwise are enabled.
00H
After reset:
7
PF10 PF107
PF10n
0
1

14.2.10 Port 11

Port 11 includes P114, which is an input-only port, as well as P110 to P113, which comprise an I/O port for which
I/O settings can be controlled bitwise.
A pull-up resistance can be connected bitwise (software pull-up function) for bit 0 to bit 3.
Read or write operation is enabled in 8- or 1-bit units. However, bit 4 is available only for read.
350
CHAPTER 14
R/W Address: FFFFF094H
6 5
PU106 PU105
Control of On-Chip Pull-Up Resistance Connection
Do not connect
Connect
Figure 14-27. Format of Port 10 Function Register (PF10)
R/W Address: FFFFF0B4H
6 5
PF106 PF105
Control of Normal Output/N-ch Open Drain Output
Normal output
N-ch open drain output
PORT FUNCTION
4 3
PU104 PU103 PU102
4 3
PF104 PF103 PF102
2 1 0
PU101 PU100
2 1 0
PF101 PF100