Mechanical Installation; Flange Mounting; Output Elements - Beckhoff AMI8100 Operating Instructions Manual

Compact integrated servo drives

Hide thumbs Also See for AMI8100:

Operating instructions manual (67 pages)

Table Of Contents

Table of Contents

Flange mounting

8.1

Motor

Bore diameter [mm]

AMI812x

Output elements

8.2

Version: 1.0

Carry out all work with great care and without time pressure.

The following table provides information on components for mount-

ing the servo drive on the machine or plant:

Quality of the cheese-head screw DIN EN ISO 4762 = 8.8

Screw size

5.5

M5 x 16

WARNING

Secure moving parts against ejection

Make sure there are no moving parts on or in the machine during

operation. Feather keys [+] are only secured during transport.

Unsecured parts can be ejected from the machine during opera-

tion and cause serious or fatal injuries.

Protect servo drive from impermissible stresses

Avoid bending components during transport or handling and do not

change any insulation distances. Avoid hard shocks to the shaft

end, the ball bearings or the feedback system. Furthermore, note

vibration qualities and vibration resistance. If necessary, provide

additional support for the servo drive.

An impermissible load on the components can have a negative ef-

fect on the performance of the servo drive. Impacts on the shaft im-

pair the concentricity of the servo drive.

Ensure adequate grounding via the protective conductor

The thermal connection of the flange determines the power loss.

Ensure adequate grounding via the protective conductor or the

flange.