Menu Item 'Create New Dsc Files - ABB REG316 4 Series Operating Instructions Manual

ABB Switzerland Ltd
Keys:
· Page Up
· Page Down
· Arrow key ­
· Arrow key ¯
· Space bar
· F1
· ESC
5.14.4.3.

Menu item 'Create New DSC Files'

This menu item is for creating the files needed from the pa-
rameter list of the particular device the first time the HMI is
started. It is also needed every time the device parameter set-
tings are changed.
In the off-line mode, a parameter file must be downloaded first
using the editor's 'Load from file' function, since the 'Create new
DSC files' function requires the currently active set of parameter
settings.
The following files are created:
· Event.DSC
· Logging.DSC
· Channel.DSC Þ
· Functyp.DSC
5-130
REG 316*4 1MRB520049-Uen / Rev. E
Þ
previous page.
Þ
next page.
Þ
one line up.
Þ
one line down.
Þ
for editing settings.
Þ
help.
Þ
for terminating the program. If changes
were made, your are requested to con-
firm that they should be saved.
Þ
event handling file for 'Reporting'
Þ
logging window file for 'Reporting'
file with the function designations
Þ
required for updating files.