ABB REG316 4 Series Operating Instructions Manual page 535

REG 316*4 1MRB520049-Uen / Rev. E
The next task is to edit the files 'Station.cfg' and 'MMKShell.mnu'
in the configuration dialogue.
The following parameters are set in 'Station.cfg':
COMT : Communication parameters
TC57 =
SPA =
MDM =
SRIO =
RDM =
BAUD : Baud rate.
TNR : Station telephone number (T...tone dialling,
P...impulse dialling)
MPAR : Modem initialisation parameters; in most cases the
default settings are satisfactory.
Select SAVE to confirm the parameter settings and update the file.
Fig. 5.65 Window for editing the station configuration
An entry for each device in the station has to be made in the file
'MMKShell.mnu'. The actual entry varies according to Windows
version.
communication via interface at the front
communication via the SPA-BUS interface
communication via modem and SPA-BUS
interface
direct communication via SRIO
communication via modem and SRIO.
ABB Switzerland Ltd
5-91