Logic - ABB REG316 4 Series Operating Instructions Manual

REG 316*4 1MRB520049-Uen / Rev. F
3.6.2. Logic (Logic)
A. Application
Logical combination of binary input signals or of output signals
from the protection functions, e.g. for
· specific signals required by the application
· supplementary protection functions.
B. Features
· binary I/P channels assignable to
·
·
· All I/P channels can be inverted
· Following logic functions available for selection:
·
·
·
· Every logic has an additional blocking I/P, which when acti-
vated switches the O/P to "0".
C. Inputs and outputs
I. C.t./v.t. inputs:
·
II. Binary inputs:
·
·
III. Binary O/P's:
· tripping
IV. Measurements:
·
binary I/P signals
protection function O/P signals
OR gate with 4 I/P's
AND gate with 4 I/P's
R/S flip-flop with 2 I/P's for setting and 2 I/P's for resetting :
· The O/P is "0", if at least one of the reset I/P's is "1".
· The O/P is "1", if at least one of the set I/P's is "1" AND
none of the reset I/P's is "1".
·
The O/P status is sustained when all the I/P's are at "0".
none
4 logic inputs
blocking
none.
ABB Switzerland Ltd
3-301