Stator Overload - ABB REG316 4 Series Operating Instructions Manual

REG 316*4 1MRB520049-Uen / Rev. F
3.5.16. Stator overload (OLoad-Stator)
A. Application
Overload protection for the stators of large generators.
B. Features
· delay inversely proportional to overload
· operating characteristic according to ASA-C50.13 (American
Standard Requirements for Cylindrical-Rotor Synchronous
Generators) with extended setting range
· adjustable rate of counting backwards when the overload
disappears (cooling rate of thermal image)
· insensitive to DC components
· insensitive to harmonics
· single or three-phase measurement
· detection of highest phase in the three-phase mode.
C. Inputs and outputs
I. Analogue inputs:
·
II. Binary inputs:
·
III. Binary outputs:
·
·
IV. Measurements:
·
current
blocking
pick-up
tripping
current amplitude.
ABB Switzerland Ltd
(see Fig. 3.5.16.1)
3-179