ABB REG316 4 Series Operating Instructions Manual page 560

ABB Switzerland Ltd
The module's binary values
The effective values, i.e. the statuses, of the inputs are dis-
played. The designation "Slot 1 DB6." is in the header and the
values of the inputs are displayed on line 3. The buttons "E" and
">" have no effect, because this is the lowest level of this branch
of the menu structure. As only a single line is needed, the arrow
^
keys "v" and " " are also ineffective. To make the statuses of the
inputs easier to assimilate, a logical '0' is represented by a hy-
phen '-' and a logical '1' by an 'X'. The LSB is on the extreme left
and the order is the same as on the HMI on the PC.
-Slot 1 DB61
-X-X---X
LSB
á
Fig. 5.99 Binary input statuses
RBI and ITL inputs and outputs
Since the selection and display of the RBI and ITL inputs and
outputs is very similar, the procedure for the RBI inputs will be
explained and applies for all the others.
When opened, the "RBI inputs" display shows the current
statuses of the RBI inputs of the first module. If no input module
is assigned to this number, all the inputs indicate a zero. The
display can be switched from one module to the next using the
arrow keys "v" and "^".
To make the statuses of the inputs easier to assimilate, a logical
'0' is represented by a hyphen '-' and a logical '1' by an 'X'. The
LSB is on the extreme left and the order is the same as on the
HMI on the PC.
-RBI-Inputs-
1
-X-X---X--------
LSB
á
Fig. 5.100 RBI inputs
5-116
REG 316*4 1MRB520049-Uen / Rev. E