ABB REG316 4 Series Operating Instructions Manual page 555

REG 316*4 1MRB520049-Uen / Rev. E
5.13.7. Entry menu
The entry menu is at the top of the menu structure. It is dis-
played every time the system is started or after pressing the "C"
button to exit a menu item and does not have a header, but sim-
ply four lines of text. The user accesses the main menu from the
entry menu by pressing either button "E" or ">".
The entry menu comprises two parts:
· The first line states the significance of the three LED's:
green LED:
yellow LED:
red LED:
· Lines two to four show the name of the device, the system
name assigned to it and the software version. The main
menu is accessed by pressing either the "E" or ">" button.
The entry menu always comprises four lines and the buttons "C",
^
" " and "v" have no effect. There is nothing to select in this dis-
play. If the RE.316*4 has not been configured, "Local Display"
appears on line 3, otherwise the name assigned to the device
using the HMI on the PC. Fig. 5.89 shows a typical entry menu:
Activ Start Trip
ABB REC316*4
Fig. 5.89
5.13.8. Main menu
The main menu lists the groups of submenus that can be se-
lected to obtain more information on the device and the primary
process. The name "Main Menu" is in the header and three of
the submenus on the three lines below. Unless the submenus
shown are at the top or the bottom of the list there is an arrow at
the end of line four pointing downwards and/or at the end of line
two pointing upwards to show in which direction the user can
scroll to see the other menu items. The first of the menu items
(line 2 of the display) is always underlined which means that it is
selected. The list can be scrolled using the arrow keys "
"Active"
"Start"
"Trip".
Example
V5.1
Entry menu
ABB Switzerland Ltd
^
" and
5-111